1500W Handheld Max Laser Cleaning Machine Laser Rust Removal Machine

Product Description

High cost-effective laser welding cleaning machines and consumables source manufacturer from China

Handheld fiber laser cleaning machine advantages:
1. Cleaning scope: Generally, laser cleaning fixes the workpiece on the workbench for cleaning operations. It can only clean small and movable workpieces, which has certain limitations. However, the handheld laser cleaning machine can clean those difficult-to-use workpieces. Moving workpieces, selective cleaning of workpieces.

2. Flexible cleaning: Laser cleaning equipment cleans workpieces in a relatively rigid manner. Some blind spots are not conducive to cleaning, while hand-held cleaning can clean the workpiece under the control of human hands. Some blind spots can also be cleaned flexibly.

3. Cleaning effect: Although the position of the cleaning head has been changed, the cleaning effect remains unchanged.

4. Focus cleaning: When cleaning uneven workpieces, the handheld laser cleaning head can adjust the focus up and down for cleaning, producing a uniform cleaning effect.

Detailed Photos

Laser machine torch

Compared with Other Welding(What advantage for Fiber laser welding machine)

Comparison item	Traditional welding	Laser welding	laser new generation laser welding
Heat input to the workpiece	Very high	Low	Low
Deformation of the workpiece, undercut	Big	Small	Small
Bond strength with base material	Generally	Good	Very good
Subsequent processing	Polished	No sanding, or little sanding	No sanding, or little sanding
Welding speed	Generally	More than 2 times of argon arc welding	More than 2 times of argon arc welding
Applicable materials	Stainless steel. Carbon steel. Galvanized sheet	Stainless steel. Carbon steel. Galvanized sheet	Stainless steel. Carbon steel. Galvanized sheet
Consumables	Many consumables	Less consumables	Less consumables
Operation difficulty	Complex	Generally	Simple
Operator safety	Not safe	Safety	Safety
Environmental protection impact	Not environmentally friendly	Environmental Protection	Environmental Protection
Welding fault tolerance	Good	Not good	Good
Weaving welding	None	None	Have
Welding quality comparison	Difference	Generally	Very good

Characteristic for portable handheld laser cleaning machine 2000W,1500W,1000W
Basic features: self-developed control system, set multiple safety alarms, smaller size, flexible operation and easy to use.
More stable: All parameters are visible, real-time monitoring of the status of the whole machine, to avoid problems in advance, more convenient to troubleshoot and solve problems, to ensure the stable operation of the welding head.
Process: All parameters are visible, the welding quality is more perfect, the deformation is small, and the penetration is high. Stable parameters and high repeatability: the determined nozzle air pressure and lens state, as long as the laser power is stable, the process parameters must be repeatable. Greatly improve efficiency, while also reducing operator requirements
 

continous style laser generator		Cleaning
LASER SOURCE		MAX BRAND SOURCE(100%NEW)
LASER POWER		CONTINOUS CW 1500W/ 2000W/1000W
CLEANING GUN/laser gun		BRAND RELFAR
WATER CHILLER		INDUSTRIAL WATER CHILLER 50HZ(2P)
LASER WAVE LENGTH		1080NM
Fiber Length			10M
beam wideth for cleaning		0-300mm
POWER ability		10KW
ADJUSTMENT FREQUENCY		1000Hz
Cooling Mode		industrial water cooling
CLEANING AREA(standard)		10Meter could customized
touch screen control panel		English language supporting cleaning mode
Gas source		0.2MPA(Argon)
Aiming and Positionning system		Red point
Laser Pulse Frequency		1-20HZ
Pulse Width		0.1-20ms
Adjusted spot range		0.1-3mm
Working Voltage		1PHRASE 220V ±10% FOR 1.5KW/2KW
		3 PHRASE 380v for 3KW
Package size(L*W*H)		162CM L *90CM W*160CM
Gross weight		220KGS/230kgs/245kgs

 

what material does portable laser cleaning machine could finish?
Aluminum,Stainless Steel, Carbon Steel,Copper,Silver, Titanium, Tin.

 

Packaging & Shipping

 

Comparison between laser cutting and plasma cutting:
1. Compared with plasma cutting, laser cutting is much more precise, the heat-affected zone is much smaller, and the slits are also much smaller;
2. If you want precision cutting, small slits, small heat-affected zones, and small plate deformation, it is recommended to choose a laser cutting machine;
3. Plasma cutting uses compressed air as the working gas and high-temperature and high-speed plasma arc as the heat source to partially melt the metal being cut, and at the same time use high-speed airflow to blow away the melted metal to form a cut;
4. The heat-affected zone of plasma cutting is relatively large and the cutting slit is relatively wide. It is not suitable for cutting thin plates because the plates will deform due to heat;
5. Laser cutting machines are more expensive than plasma cutting machines;

Advantages of laser cutting:
1. Thin cutting seam: The cutting seam of laser cutting is generally 0.10~0.20mm;
2. Smooth cutting surface: The cutting surface of the laser cutting machine has no burrs and can cut plates of various thicknesses. The cutting surface is very smooth and requires no secondary processing;
3. Fast speed, improving metal plate cutting production efficiency;
4. Wider adaptability: No matter it is a large or small plate, it can be processed without any restrictions as long as the work surface allows it. In contrast to traditional stamping forming, the mold manufacturing cost of large products is very high, and laser cutting does not require any molds. Manufacturing, and can completely avoid the sagging formed when punching and shearing materials, greatly reducing production costs and improving product quality.
5. Suitable for the development of new products: According to the product drawings, laser processing can be carried out immediately, and the physical objects of the new products can be obtained in a short time.
 

Company Profile

 

About us: 

1-Brands and variety of consumables:
We are producing replacements of Hypertherm, Lincoln, kaliburn, Thermal Dynamics, P80 and Chinese brands, including plasma electrode, plasma nozzle, swirl ring, plasma shield and retaining cap. 
We use high-quality hafnium wire to ensure long service life and good cutting effect. Our product is affordable and can also ensure excellent performance.
2-Machines:
We have been specialized in CNC equipment and laser equipment more than 10 years. We can provide you products with high quality and low price. Our products include CNC plasma cutter, fiber laser cutter, laser welding machine, laser cleaning machine as well as related consumable material.
3- Business philosophy:
We want to build long-term relationships with customers rather than developing one-off deals.
By providing our products to help you succeed in your endeavors.
The core idea of ALLWIN is our commitment to achieving mutual success for our customers, shareholders, and employees through collaboration.
4-We are sure that one of our products is that you are looking for. We also welcome you to visit our factory!

Certifications