Handheld Portable Laser Cleaning Machine Laser Rust Remover 1500W 2000W 3000W 50Hz 60Hz

Product Description

Product Description

Fwincnc Laser Cleaning Machine 
A continuous laser cleaning machine is a device that uses continuous wave laser (CW laser) for surface cleaning. Its working principle is to continuously emit a high-energy continuous beam on the surface of the workpiece, and the laser energy instantly heats and vaporizes the oxide layer, rust, oil, coating and other pollutants on the surface of the workpiece, so that it can be decomposed, vaporized or peeled off without damaging the surface.

Product Features

• High Cleaning Efficiency
  Continuous laser output enables fast removal of rust, paint, oil, and surface contaminants, ideal for large-area cleaning.

• Strong Cleaning Power
  Delivers higher average energy, making it suitable for heavy rust, thick coatings, and industrial-scale applications.

• Stable & Consistent Output
  Continuous laser provides uniform cleaning results with smooth surface finish.

• Non-Contact & Eco-Friendly
  No abrasives or chemicals required, reducing waste and environmental impact.

• Wide Application Range
  Suitable for steel structures, shipbuilding, pipelines, molds, and automotive components.

• Precision Cleaning with Surface Protection
   It causes almost no damage to the substrate's surface and allows for the adjustment of the light emission width, enabling precise and targeted cleaning.

• Low Operating Cost
  No consumables, low maintenance, and long service life.

  No.	continous style laser generator		Cleaning
  1	LASER SOURCE		MAX BRAND SOURCE(100%NEW)
  2	LASER POWER		CONTINOUS CW 1500W/ 2000W/3000W
  3	CLEANING GUN/laser gun		SUP22C
  4	WATER CHILLER		INDUSTRIAL WATER CHILLER 50HZ(2P)
  5	LASER WAVE LENGTH		1080NM
  6	Fiber Length			10M
  7	beam wideth for cleaning		0-300mm
  8	Power consumption capacity		10kwh at peak performance with 3000W
  			7kwh at peak performance with 2000W
  			5.25kwh at peak performance with 1500W
  9	ADJUSTMENT FREQUENCY		1000Hz
  10	Cooling Mode		industrial water cooling
  11	CLEANING AREA(standard)		10Meter could customized
  12	touch screen control panel		English language supporting Welding,cleaning,cutting mode
  13	Gas source		0.2MPA(Argon)
  14	Aiming and Positionning system		Red point
  15	Laser Pulse Frequency		1-20HZ
  16	Pulse Width		0.1-20ms
  17	Adjusted spot range		0.1-3mm
  18	Working Voltage		1PHRASE 220V ±10% FOR 1.5KW/2KW
  			3 PHRASE 380v for 3KW
  19	Package size(L*W*H) 1.5KW/2KW		1360mm  *550mm*980mm    147KGS

   

Product Application

1500w/2000w/3000w handheld continuous laser cleaning of the surface of the object will produce thermal expansion effect: that is, the difference between the substrate and the surface pollutants in the laser energy absorption coefficient of a certain wavelength, so that the substrate and the surface dirt absorb energy to produce thermal expansion, when the expansion force of the dirt is greater than the adsorption force of the dirt on the matrix, the dirt will be removed from the surface of the object.

Detailed Photos

High Efficiency & Powerful Cleaning
Relfar handheld laser cleaning guns are designed for efficient removal of rust, paint, oxidation and coatings over large areas. Some models support high-power lasers (up to 6000 W) and fast scanning, improving work speed and productivity.

Lightweight & Ergonomic Design
The laser gun head is built lightweight and ergonomically shaped to reduce operator fatigue, making it easier to work in tight or awkward positions-especially for extended cleaning jobs. 

Built-In Cooling & Stable Operation
 

Intelligent Control & Real-Time Feedback
They often use smart control systems (e.g., RuiDa) that provide real-time status feedback and

 

 

MAX Laser Source

It has higher photoelectric convers-

ion effciency, better and more stable beam quality, and stronger anti-high-reflection ability. At the same time, it introduces an optimized second-generation optical fiber transmiss-

ion system to ensure a more stable and precise cutting effect in thick plate cutting.

Display screen:
The display screen is embedded in the side of the machine so there is no need to worry about the screen being scratched and this
design also saves space.

Cleaning modes:

7 cleaning modes: Linear mode, rectangular mode, circular mode, sinusoidal mode, double helix mode, free mode, circular mode.

Different modes suitable for working on different materials with different cleaning requirements.

The difference between continuous laser cleaning machine and pulsed laser cleaning machine, which one should I choose?

Continuous Laser Cleaning Machine and Pulsed Laser Cleaning Machine are two common types of laser cleaning technologies. Their main differences lie in the way laser is emitted, the application scenarios, and the cleaning results. Here's a detailed comparison:

1. Laser Emission Mode

Continuous Laser Cleaning Machine: The laser emits continuously at a constant power, suitable for applications that require long-duration stable cleaning.

Pulsed Laser Cleaning Machine: The laser emits in pulses, delivering concentrated energy in a very short time, ideal for tasks that need high peak power for cleaning.

2. Cleaning Effect

Continuous Laser Cleaning Machine: Suitable for removing relatively loose contaminants, such as oil, rust, or coatings. The continuous laser output is smooth and steady, making it ideal for large-area, continuous cleaning.

Pulsed Laser Cleaning Machine: Utilizes high-power pulsed laser energy, which effectively removes stubborn contaminants, such as thick oxide layers, coatings, or welding residues. Pulsed lasers typically provide stronger impact and deeper cleaning results.

3. Application Scenarios

Continuous Laser Cleaning Machine: Primarily used for cleaning flat surfaces of metal objects, such as cleaning oils, oxide layers, or light rust from steel, aluminum, copper, etc.

Pulsed Laser Cleaning Machine: Widely used for removing heavy rust, coatings, welding marks, or other tough and stubborn contaminants. It is suitable for cleaning precision equipment, antique restoration, and applications that require high precision.

4. Energy Density and Heat Impact

Continuous Laser Cleaning Machine: Since the laser power is continuously emitted, the energy density is lower, resulting in minimal heat impact. It is suitable for cleaning materials that are not easily damaged by heat.

Pulsed Laser Cleaning Machine: Pulsed lasers release high energy in a very short time, resulting in a higher energy density, capable of quickly removing contaminants. However, it requires careful control of heat impact to avoid unnecessary thermal damage to the material surface.

5. Cleaning Speed

Continuous Laser Cleaning Machine: Due to the steady laser output, it can achieve faster cleaning speeds, making it suitable for large-area cleaning tasks.

Pulsed Laser Cleaning Machine: While pulsed laser cleaning has a higher peak energy, it may be slightly slower than continuous cleaning due to the need for pulse frequency and interval control.

6. Cost

Continuous Laser Cleaning Machine: Generally more economical, ideal for simple cleaning tasks, thus typically costing less than pulsed laser cleaning machines.
Pulsed Laser Cleaning Machine: Due to the higher peak power and precise control, it is usually more expensive, making it suitable for high-precision applications.

Company Profile

 

Established in 2017, ALLWINCNC are a manufacturing company specializing in the production of plasma and laser consumables.We want to build long-term relationships with customers rather than developing one-off deal.

We want to build long-term relationships with customers rather than developing one-off deal.

The core idea of ALLWIN is our commitment to achieving mutual success for our customers, shareholders, and employees through collaboration. 

 

FAQ

1), Q: Do you have after sales support?
A: Yes, we are happy to give advice and we also have skilled technicians available across
the world. We need your machines running in order to keep your business running.
2),Q: I am not sure if this machine suitable for my work?
A: Don't worry, just tell me your working materials, max working area and cutting/welding thickness,
then I will recommend you the most suitable machine for you.
3),Q: Are you factory or trading company?
A: We are factory, which manufactures CNC cutting/welding machines , with 13 years experience.
4)Q. When I got this machine, but I don't know how to use it. What should I do?
Operation video and manual will be sent together with machine. Our engineer will do training online.If needed, we can send our engineer to your site for training or you can send the operator to our factory for training.